For builders and architects
Bring Greenwall in while the drawings are open. We advise on plants for your light and climate, water and drain points, and what upkeep will involve.
What to plan at drawing stage
Water
A water point near the wall, with room for the irrigation controller.
Drainage
A route for excess water, planned before finishes go in.
Power
A power point for the timer.
Structure and waterproofing
A wall that can carry the frame and pots, with waterproofing confirmed by the project team.
Light
Daylight or planned lighting for indoor walls. It decides the plants.
Access
Safe access for planting and monthly maintenance, especially on tall walls.
The modular pot system
Pots in a frame
A frame goes on the wall and pots sit in it in rows, about 3.6 pots per sq ft.
One plant, one pot
If a plant tires, its pot lifts out and a fresh one goes in. Its neighbours aren't disturbed.
Easy to change later
Every pot comes out on its own, so a pattern or plant mix can be changed without rebuilding the wall.
Water built in
From ₹750 per sq ft, a drip line runs along each row.
Rates start at ₹550 per sq ft without irrigation and ₹750 with it. Commercial walls of 500 sq ft or more are ₹650 per sq ft on the complete wall, with 2 months free maintenance. A modular wall uses about 3.6 pots per sq ft. Rates and estimates are before GST, which is added at the rate that applies. What each rate includes
Ask for the spec sheet
We'll send our spec sheet and company profile for your tender file or vendor list.